GOLF DRIVER LEFT HANDED LOW SPEED – INESIS 900

Our passionate golf team designed this driver for advanced players with a handicap of less than 15.Get the most out of your swing by choosing the right driver length and the shaft is adapted to your swing speed. The 900 Driver combines power, control and forgiveness.

HOW TO CHOOSE YOUR CLUB SIZE

It is the distance between the ground and your hands which determines the length of your clubs.
At Inesis, we offer 2 sizes:
SIZE 1: suitable for players with a ground to wrist distance less than 78.5 cm
SIZE 2: suitable for men and women players with a hand-to-ground distance of 78.5 cm or more.
We recommend a size 2 if the measurement is 78.5 cm.

You can easily measure your size at home by following method you see in the video.

TECHNICAL SPECIFICATIONS / 900 DRIVER LEFT HANDED S1/S2 LS

Loft: 10°
Swing weight: C8 for S1 / D2 for S2
Flexibility: Regular
Length: 43.5 for S1 / 45.5 for S2
Torque: 6.2°
Lie: 58°

The grip on the 900 Driver is adapted to the length of the club:
Undersized size 1 grip on size 1 shafts
Standard size 2 grip on size 2 shafts

Grip weight S1: 44 grams
Length: 26.5 cm
Diameter: 2.6 cm

S2 Grip Weight: 51 grams
Length: 26.5 cm
Diameter: 2.7 cm

Driver cover included.

THE BEST TITANIUM

The 900 driver is assembled in two parts: the body and the face. This limits the number of manufacturing steps and, therefore, the production forgiveness. The power also comes from the quality of the materials. We chose 8-11 titanium for the body of the head because of its very good mechanical properties. The face is forged from titanium 15. It is an alloy made of titanium and 4 other materials to further improve its features. So, a kind of super titanium!

A HIGH-PERFORMANCE FACE

The face has a honeycomb structure that increases its mechanical resistance. This allows us to best refine the face to improve the trampoline effect. The result? This ball goes faster from the club.

10° IS THE IDEAL LOFT

Did you know that the first factor that influences a club’s power is loft? Do you want to gain 10 metres with your 7-iron? Change it from 32° to 28° Except, at a certain point, this does not work any more. With the driver, you have to find the lowest loft that you can get enough ball height with (around 30 metres is ideal) and the right amount of spin (around 2000-2500 rpm) for a good trajectory and turning power into distance.

2 WEIGHTS, 2 HEIGHTS

4g aluminium front weight / 14g tungsten back weight = higher ball and more carry.
14g tungsten weight in the front / 4g aluminium weight in the back = lower ball and better roll.

The location and mass of the weights have been validated by robot tests conducted by the independent laboratory Golf Laboratories.

A DEDICATED SPANNER

Your 900 Driver is supplied with a special spanner to remove the removable weights under the sole. We recommend that you do not use any spanners other than the one supplied with your 900 Driver.
The weights are only available in 4g and 14g and are not sold separately.

THE BEST SHAFTS OF THE MOMENT

We continue to trust the excellent products from UST Mamiya. We have selected those that work best for our head for the three target swing speeds. The new LIN-Q MAX WHITE produces the best results in terms of distance and accuracy.

UST MAMIYA SHAFT, LIN-Q

For the 900 Driver, we have kept the same principle of two sizes that is found on all the Inesis and three swing speed clubs. However, with the same speed designation (low, medium, high), the 900 Driver shafts are significantly stiffer than the 500 Driver.

LIN-Q 6F3: 66g weight for low speed
LIN-Q 6F4: 67g weight for medium speed
LIN-Q 6F5: 67g weight for high speed

HOW TO DETERMINE YOUR SWING SPEED

By asking just one simple question: you’re on the fairway, just under 135 meters from the flag – which club do you choose?
5-iron, hybrid, driver: you have a LOW SPEED swing
6- or 7-iron: you have a MEDIUM SPEED swing
8-iron or lower: you have a FAST SWING SPEED

Shared by Charles Garbani, Designer of the 900 Driver

“Compared to the 500 Driver, which our development was based on, the design had to be sleeker and more technical. The lines, as well as the technologies used, reflect the sense of control in the design: we use CNC machining, laser engraving, 3D decal, etc.”

Assembled in France

The 900 driver is assembled in Lille, France in the AML factory at b’Twin Village. People used to assemble bikes there, especially the top of the range road bikes. Skilled technicians now also assemble golf clubs on a chain dedicated to the 900 clubs.